Shared battery car operation?


With the rapid development of science and technology in the world, processing technology has become more and more familiar into people's field of vision, green manufacturing has been highly valued, and the manufacturing of shared battery cars has also been upgraded to a new stage. So what do we need to pay attention to in the process of use?

With the rapid development of science and technology in the world, processing technology has become more and more familiar into people's field of vision, green manufacturing has been highly valued, and the manufacturing of shared battery cars has also been upgraded to a new stage. So what do we need to pay attention to in the process of use?

Before working on a shared battery car, you must check the brakes, horn (alarm), lights, battery voltage and current. If there is any abnormality, it should be repaired or replaced. Forced operation when the machine is in an abnormal state is prohibited. The driver must obey the signal command. When the signal is not clear, it is forbidden to drive without authorization. When starting, the horn (bell) shall be sounded to warn. In the shared battery car should pay attention, head, hands are not allowed to stretch out at will, and always observe the line situation, whether there is any bending frame and other facilities debris intrusion in the cave (travel gap: 2m,o.4m on the rail surface); Non-staff are not allowed to get on the locomotive; No one is allowed to get on the bus on the towed tramcar. There must be a special person responsible for shunting, decoupling, switching and placing the iron wedge. The use of any other object in place of the coupling pin and the iron wedge is prohibited. When handling articles that are too wide or too high, the driver must confirm whether the size exceeds the limit (the loading height shall not exceed 1.5m at the top of the track and the width shall not exceed 0.1m at the outer edge of the track) and whether there is any danger of collapse on the way. At the intersection, empty cars give way to heavy cars and are not allowed to rush. When the driver leaves the shared battery car, he must brake the locomotive and cut off the current; if necessary, use iron wedges to wedge the wheels.

The mileage of a shared battery car is defined as follows: "When the new battery is fully charged, the rider's weight is configured to be 75kg. Riding on a flat secondary road (no strong wind), the battery voltage is less than 10.5V/power failure. Under the above conditions, the riding mileage obtained is called the continuous mileage of the electric bicycle".

Generally, the cruising range of shared battery cars of well-known brands equipped with 36V 12 A high-quality batteries is about 45-60 kilometers, while the cruising range of some manufacturers will rise to 70-80 kilometers, which is false propaganda. Because reaching this nominal value means that the efficiency of the motor is nearly 40% higher than that of the motor used by the manufacturer. If the efficiency of the motor produced by the factory is 75% under the above working conditions, and the efficiency of the motor of the factory with a nominal 70-80km has reached the above level, this is obviously impossible, which is to remind consumers to pay attention.

Our company insists on using high-quality materials, making high-quality products, taking responsibility for customers, taking customers as the first, and creating a win-win situation. We have always maintained a high quality service, adding a successful color to thousands of consumer goods and industrial products, and have been widely recognized by the industry to achieve a win-win vision with partners. If consumers want to buy this type of product, remember to shop around. This is an era of information technology. There is no need for everyone to go to the market and work hard. You can directly search for relevant manufacturers on the Internet.

HedvcEG2RdmgvZhnvVduaw.jpg

Hot information